KLINGERSIL® C-4240

Resistant in uncritical media such as drinking water, water, oils, fuels, hydrocarbons and inert gases.

KLINGERSIL® C-4300

Resistant to hot water, steam, oils, hydrocarbons and many other chemicals.

KLINGERSIL® C-4324

This gasket material is suitable for the use in liquids and steam at lower pressure and temperature. Resistant to water, oils, hydrocarbons and many other chemicals.

KLINGERSIL® C-4400

Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

KLINGERSIL® C-4408

Resistant to oils, water, steam, gases, fuels, alcohols, hydrocarbons, lubricants and refrigerants.

KLINGERSIL® C-4409

Chemical resistance to oils, water, steam, hydrocarbons as well as to liquid and gaseous chemicals.

KLINGERSIL® C-4430

Resistant to water and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

KLINGERSIL® C-4500

Made from high-tech materials it offers excellent service in many sectors of the chemical industry. Main fields of application:
alkaline media and steam.

KLINGERSIL® C-4509

Made from high-tech materials it offers excellent service in many sectors of the chemical industry. Main fields of application: alkaline media and steam.

KLINGERSIL® C-8200

This material is resistant to a wide variety of media and especially to acids.

TOMBO No. 1120

It is used for flanges, valves, and equipment in comparatively hot temperatures. For low-temperature fluids such as liquefied natural gas (LNG), Nichias recommends TOMBO No.1120-LN, which undergoes special treatment.

TOMBO No. 1995

It is a standard grade joint sheet. Nichias can manufacture large-diameter gaskets without joints at a maximum size of 3810 x 3810 mm (95 size). It is used for flanges, valves, and equipment in comparatively low temperatures.

TOMBO No. 1993

It has excellent heat resistance and steam resistance and is suitable for steam lines.

TOMBO No. 1133

It can be used for a wide range of fluids such as acids, alkalis, oils, petrochemicals, organic solvents, hot oils, heat-transfer gases, and steam. (Except for some strong alkalis and acids.) It has the best heat resistance among fluororesin gaskets. It can also be used for parts that need electrical insulation.

TOMBO No. 9007

NAFLONTM PTFE GASKET has excellent chemical resistance and anti-staining properties, and is used as a gasket material in a wide range of industries such as fine chemicals, petrochemical industry, pharmaceuticals, food industry, and semiconductor industry.

TOMBO No. 9096

It is a soft gasket made of PTFE. It is extremely soft, and the model with adhesive tape can easily be installed on sealed surfaces of complex shapes. It is used for the likes of pipe sealant, tanks, casing, pressure containers, stress tanks, lining equipment, and large-diameter equipment.

TOMBO No. 1200

It is more cost-effective than the other GRASEAL GASKET models.
As it is weaker and less workable than the steel sheet type, Nichias recommends using it only for nominal diameters of 4 inches or less.
It can be used for uniquely shaped flanges such as liquid level gauges, as well as various industrial pipe flanges, heat exchanges, and valve bonnets.

TOMBO No. 1215

It has excellent workability and can be machined into complex shapes.
It is used for uniquely shaped flanges, valve bonnets, heat exchangers, etc.
Nichias also offers TOMBO No.1215-T, which has improved sealing performance against gas by undergoing treatment to make it impervious. (However, its maximum working temperature is 260°C.)

Kami antusias menyediakan FRP Grating baik berupa potongan dengan ukuran tertentu maupun lembaran. FRP Grating cocok dipakai untuk pijakan kaki (walk away) pada tangga maupun platform pabrik Food & Baverage, Oleochemicals, Chemicals, Petrochemicals, Oil & Gas, dan instalasi Panel Surya. Disamping tahan karat, FRP Grating dapat menambah estetika.